JV RIGID INSULATION ANCHORS


JV Rigid Insulation Anchors typical application

JV Rigid Insulation Anchors are recommended for securing rigid insulation, extruded polystyrene, expanded polystyrene, high density rockwool and composites, to solid base materials.

JV Rigid Insulation Anchors are a one piece anchor manufactured from corrosion resistant Polypropylene. The head diameter is 35 mm (1 3/8") and features a rough surface to provide a key for applied finishes.

JV Rigid Insulation Anchors are available in varying lengths to suit a wide range of insulation thickness. These anchors are installed by driving into a 8mm (5/16") diameter pre drilled hole. The base material should be solid, typically brickwork, concrete or solid block.

Length Min Embedment Insulation Depth
50mm
(2")		 30mm
(1 3/16")		 0 to 10mm
(0 to 3/8")
70mm
(2 3/4")		 30mm
(1 3/16")		 20 to 40mm
(3/4" to 1 1/2")
90mm
(3 1/2")		 30mm
(1 3/16")		 50 to 60mm
(2" to 2 3/8")
110mm
(4 1/2")		 30mm
(1 3/16")		 70 to 80mm
(2 3/4" to 3 1/8")
130mm
(5 1/8")		 30mm
(1 3/16")		 90 to 110mm
(3 1/2" to 4 1/4")

Technical and application data available on request.